The good swimming-pool dehumidifiers

We are very pleased to welcome you on our website. Here you will find information and advice for the air conditioning and dehumidification of private, commercial or public swimming pools.

There are many suppliers of dehumidifi-ers on the market, but "the good swim-ming-pool dehumidifiers" with PWL sys-tem* are manufactured exclusively by us. We develop and produce dehumidifiers with distinctive quality and durability, down to the last detail.

Due to the almost complete heat recov-ery (heat pump principle), the precious energy of the indoor swimming pool is maintained. Our highlight: special large area heat exchangers especially made of resistant materials ensure high effective-ness. This unprecedented efficiency guarantees extremely low costs.
We are available also after your pur-chase: A dense network of service and customer support partners cooperates with us.

Do you have questions, ideas or sugges-tions concerning the use of our products? Contact us, we will be happy to take the time to advise you.

Your Morgenschweis Air Conditioning Team

 

Swimming Pool Dehumidifiers Type SET

“SET” is the abbreviation for “swim-ming pool dehumidification chest” in German. The devices of the “SET” se-ries are ready-to-use dehumidifiers, to be installed directly at the location of the swimming pool.
Mit PWL - System

Swimming Pool Dehumidifiers Type ETM

“ETM” stands for “engine room de-humidification chest” in German. These devices can be set up with little installation effort inside the machine room and therefore remain invisible at the swimming pool location. Mit PWL - System

Swimming Pool Dehumidifiers Type EZG

Dehumidifiers of the EZG type, which stands for “central dehumidification device” in German, are designed for commercial and public use. Due to their automatic air quality measure-ment (C02), outside air is admixed as required.

SET Schwimmbad Entfeuchtungs Truhe 367

Dehumidifier Accessories.

We manufacture a variety of accesso-ries for swimming pool dehumidifica-tion systems, including air supply - outlet rails for ground installation, temperature, humidity and air quality control devices, and much more.

Product Overview.

Here you will find the product over-view of all our products and accesso-ries.

Specifications overview for:

- SET
- ETM
- EZG

 

 

 

 

MORGENSCHWEIS Klimatechnik - das PWL-System

Permanent - Water - Air Filter - system (PWL-system)

All chests - dehumidifiers have the PWL - system, which is produced only by MORGENSCHWEIS climate technology worldwide.

A natural filtering principle, the precipitation in rainy comparable.
The horizontal arrangement of the refrigerating register, the slats are vertical, it accumulates between the individual lamellae water and forms a natural air filter, which constantly regenerates.
Dirt, dust and small particles are absorbed in the condensate, and drops into the drip pan.
Clean, washed and dehumidified air thus reaches back into the pool area. This superfluous heating and operating costs can be saved.

Also suitable for allergy sufferers and just!

Suitable for allergy sufferers. The filter system cleans the air very efficiently.

 

Customer reviews

"My father and my brother already have their dehumidifiers in operation and are very satisfied with them and thus I have also chosen your devices."
Wolfgang S.  -  entrepreneur
"At last somebody who understands something about this"
Robert T.  -  physician
"It's fun to work with you"
Uwe R.  -  engineer
"Dear Morgenschweis Team, I would like to thank you for the fast and pro-fessional service"
Torsten W.  -  entrepreneur
"Delivery was done fast, giving them 6 of 5 possible points. THANK YOU"
Thomas K.  -  Media
"Really great service. Thanks for the prompt delivery"
Alexander K.  -  entrepreneur
"They are really honest and fair, some-thing rare these days."
Simone H.  -   media

And so the MORGENSCHWEIS function dehumidifier:

MORGENSCHWEIS dehumidifiers are performance-optimized heat pump with a
high-efficiency, full heat recovery.
All dehumidifiers are based on the heat pump principle.
The moist air is removed via a closed coolant circuit heat energy.
Water is separated and rains in the drip tray.
The extracted heat energy then heats the cooled and dry air at Durchströhmen the capacitor.
Subsequently, the warm and dry air flows out of the dehumidifier.
The condensate can be fed to the pool water.

Geraetekarte
  1. Air outlet opening
  2. Condenser heats the air
  3. Humidistat and thermostat
  4. main switch
  5. control
  6. Compressor on rubber mounts
  7. Aluminium frame profile, powder-coated
  8. Drain pan made of aluminum alloy powder-coated
  9. Evaporator, cools and dehumidifies
  10. Fan housing with laufruhigem twin roll fan
  11. condensate drain
  12. Floor opening for connections and flow

Fig. 30 SET with open front panel.

 

Permanent - Water - Air Filter - system (PWL-system)

All chests - dehumidifiers have the PWL - system, which is produced only by MORGENSCHWEIS climate technology worldwide.

A natural filtering principle, the precipitation in rainy comparable.
The horizontal arrangement of the refrigerating register, the slats are vertical, it accumulates between the individual lamellae water and forms a natural air filter, which constantly regenerates.
Dirt, dust and small particles are absorbed in the condensate, and drops into the drip pan.
Clean, washed and dehumidified air thus reaches back into the pool area. This superfluous heating and operating costs can be saved.
Also suitable for allergy sufferers and just!

 lamellen

Frequently Asked Questions

1.) "What actually mean the designations 'SET', 'ETM' and 'RTB'?" SET means pool dehumidifier chest.
ETM is Entfeuchtungstruhe engine room.
EZG dehumidifier's central unit.
2.) "Can you type SET with a colorful design or by any motives such as getting a dolphin?" In principle, yes. Any kind of paintings or other reasons could be transferred to the front panel of the SET. Since the majority of our customers appreciate the simple, unobtrusive design, we do not separate advertising for it. Please contact, if necessary, to Mr. Thomas Morgenschweis.
3.) "My pool has a water surface
of 32 m² that your dehumidifier would best suit it? And you have to add fresh air? "		 That depends on your needs and the type of use. For the purely private use you need (as opposed to commercial use!) Eg no admixture of fresh air, and if levels allow it, you can use a swimming pool dehumidifiers SET 30 (installation in the pool room; 230 volts) energy saving dehumidification and heat over many years to come!
You can also use our swimming pool dehumidifiers ETM 30 as wall unit.
4.) "Why must you even have a dehumidification of a swimming pool, you can not just ventilate to get the humidity out of the building?"

This is due also possible, especially in hot and dry countries, and that is why we have, for example, also few customers below the 40th parallel. However, if we ventilate in our latitudes by opening windows, then we take strictly cash (= thermal energy!) Out the window, and particularly in the months of October to March / April. How high humidity in the building structure, moreover harm, you can among other things, Here ... read. Our Entfeuchteranlagen with 100% heat recovery play as quickly the investment cost again! Read more here ...
5.) "Why do you have any reference list of your customers on your website?" Because we to our customers in the interest of both sides maintain loyalty, although there also so many VIP could be called. If you as the next customer would like to appear on a list of satisfied clients, then only after a written agreement with the management.
6.) "Is it possible the ETM to operate equipment over 8 to 12 meters air ducts? And how do the mounting dimensions for your ETM 30 from?"
The execution ETM with round neck is designed for installation in machinery spaces. By the standard use of Fischbach-compact fan in frame size 40 and ETM ETM 50 air volumes from 900 m³ / h at 130 Pa pressure difference can be achieved - that is about 10-15 m pipe length are possible. An enhanced fan is short notice for the ETM 30th The mass for the ETM - dehumidifier, please refer here:
Dimensions of ETM equipment.

 

Dimensions of ETM equipment

Dimensions SET / ETM 20 - 50

Type depth width height
SET / ETM 20 390 1.120 900
SET / ETM 30 390 1.420 900
SET / ETM 40 440 1.490 900
SET / ETM 50 440 1.610 900

finger

Drag your fingers over the table to see the full contents of the table.

All dimensions in mm. Subject to technical and dimensional changes.

Copyright © 2001 - 2016 MORGENSCHWEIS Klimatechnik GmbH | 21.04-2015

 

Dimensions SET / ETM 20 - 50

Dimensions SET / ETM 20 - 50
Masse SET und ETM
Typ depth width
 height
SET / ETM 20 390 1.120 900
SET / ETM 30 390 1.420 900
SET / ETM 40 440 1.490 900
SET / ETM 50 440 1.610 900
All dimensions in mm. Subject to technical and dimensional changes.
Copyright © 2001 - 2016 MORGENSCHWEIS Klimatechnik GmbH | 21.04-2015

More Articles ...

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

    • Infos

    Unsere Produkte

    Unsere Angebote

    Design by: It Prisma

    By using our website, you agree to our use of cookies.

    I agree
    This is offcanvas menu you can easily add any module here, which show on any small device such as tab, smart phones etc.